66
AMPW 400-1000L I&O Manual
APPENDIX A: Tables
III. Product Rating, Specifications, and Dimensional Data
Table 1: AMP Water Heater Ratings
Table 2: AMP Water Heater Specifications
Table 3: Appliance Connection Sizes
IV. AMP Water Heater Component Identification
VI. Pre-Installation and Mounting
Table 4: Corrosive Combustion Air Contaminants
Table 5: AMP 400-1000L Clearances
Table 6: Vent and Combustion Air Pipe Diameters and Maximum Lengths
Table 7: Equivalent lengths of Vent and Combustion Air Components
Table 8: Vent and Combustion Air Equivalent Length Calculation Worksheet
Table 9: Recommended Venting Configurations and Material Options
Table 10: Combustion Air and Flue Gas Flow Rates
Table 11: Approved Vent Manufacturers and Materials
Table 12: Stainless Steel Vent Terminations
Table 13: Polypropylene Vent Terminations
Table 14: Direct Vent Terminal Clearances
Table 15: Other than Direct Vent Terminal Clearances
Table 16: Condensate Neutralizer Kit
Table 18: Approximate Time for Scalding
Table 19: Water Quality Requirements
Table 20: Operating Water Flow Rates
Table 21: Absolute Water Flow Rates
Table 22: Temperature rise, flow rate, and head loss
Table 23: Pumps, Pipe Size, and Total Head Loss
Table 24: Required Common Piping Sizes for Multiple Appliances
Table 25: Maximum capacity of schedule 40 black pipe in CFH*
Table 26: Equivalent Lengths of Standard Pipe Fittings & Valves (ft)
Table 27: Specific Gravity Correction Factors
Table 28: Inlet Gas Pressures and Pipe Size