Ammann AP 240, Operating Manual

Page: 21 / 170

15 AP 240
SPECIFICATION MANUAL 1.3. Technical data
Weight
Operating weight of CECE with cab, ROPS kg (lb) 9590 (21140)
Operating weight of CECE with cab kg (lb) 9290 (20480)
Operating weight of CECE with platform, rail kg (lb) 9060 (19970)
Weight of half fluid capacities kg (lb) 340 (750)
Operating weight of ISO 6016 with cab, ROPS kg (lb) 9930 (21890)
Max. weight – cab + ROPS (6016) + acces weighing kg (lb) 24000 (52910)
Maximum permitted weight according to ROPS kg (lb) 24000 (52910)
Weight of empty ballast tanks kg (lb) 1100 (2430)
Balance weight 6 t kg (lb) 6000 (13230)
Weight of ballast tanks filled with concrete kg (lb) 2800 (6170)
Weight of ballast in frame – water kg (lb) 3000 (6610)
Weight of ballast in frame – sand kg (lb) 4500 (9920)
Weight of ballast in the frame – scrap up to the total machine
weight
kg (lb) 24000 (52910)
Cab weight kg (lb) 280 (620)
Weight of ROPS kg (lb) 300 (660)
Weight of ROPS/FOPS (CNH design) kg (lb) 530 (1170)
Weight of sheet roof on ROPS kg (lb) 50 (110)
Weight of canopy kg (lb) 50 (110)
Weight of canopy posts (version without ROPS) kg (lb) 60 (130)
Weight of wheel insulation kg (lb) 120 (260)
Weight of Ammann cutter kg (lb) 150 (330)
Driving characteristics
Number of speeds - 3
Maximum transport speed km/h (MPH) 0-19 (0-11,8)
Working speed 1 km/h (MPH) 0-5 (0-3,1)
Working speed 2 km/h (MPH) 0-11 (0-6,8)
Working speed 3 km/h (MPH) 0-19 (0-11,8)
Climbing ability % 25
Lateral static stability % 32
Turning radius inner (edge) left mm (in) 6180 (243,3)
Turning radius inner (edge) right mm (in) 6065 (238,8)
Turning radius outer (contour) left mm (in) 9960 (392,1)
Turning radius outer (contour) right mm (in) 8735 (343,9)
Type of drive - Hydrodynamic
Type of gearbox - Three-stage reversing
Number of driving axles - 1
Number of driven wheels - 4
Oscillation angle ° 3
Angle of steering ° 32
Steering
Type of steering - Two-point suspension
Steering control - Hydraulic power steering
Linear hydraulic motors - 1