Ammann AP 240, Operating Manual

Page: 114 / 170

108 AP 240
374044
374045
374063
3.6. Lubrication and Maintenance Operations
Clean contact surface for filter gasket. Screw on the filter •
and tighten properly with hand.
Use filler neck to fill the engine – medium amount is 7 l •
(7.4 qt).
Fill to upper gauge line of the dipstick. Amount of oil be- •
tween gauge marks on the dipstick is 1,5 l (1.6 qt).
Drain oil into catch vessels.
Spent oil and filter are ecological waste –
hand over for disposal.
Do not tighten excessively the filter, its
thread and gasket may get damaged.
Note:
Refer to Engine Operation and Maintenance Manual for the spe-
cial spanner required.
When exchanged, start the engine for 2 - 3 min. Check tight- •
ness of drain plug and filter. Stop the engine and wait for
5 min. until oil flows down to crankcase sump. Then use dip-
stick to confirm oil level.
Exchange oil after 3 months at the latest
even though 250 hours have not been
actually operated. Exchange oil within
interval that occurs as first.
Use recommended filters, refer to
Catalogue of Spare Parts.
Use oil as per Section 3.2.1.