Ammann AP 240, Operating Manual, Page: 126 / 170

120 AP 240
374085
374090 374090
3.6. Lubrication and Maintenance Operations
3.6.20. Check oil for final drive and rear axle
Clean and unscrew inspection plug for final drive (Allen key •
18). Check oil level is up to inspection hole. Tighten the plug
with 80÷90 Nm (59÷66.4 lb ft). Fill up with oil as per Section
named “Oil Exchange – after 1000 hours.
Clean and remove plug on rear side of down gear hous- •
ing, and check if level reaches up to the inspection hole or
flows out slightly. Fill up with oil as per Section named “Oil
Exchange – after 2000 hours.
3.6.21. Check of wiring
Check for any damage to cables, connectors, protective •
hoses, and their fastening, especially if in the vicinity of hot
surfaces and moving parts of the machine including the en-
gine. Replace damaged parts. Use only original spare parts.