10.13
FUNCTION KEYS IN EDIT OF DMX CHANNELS MODE
GB
In
EDIT DMX CHANNEL
mode there are 6 ffuunnccttiioonn kkeeyyss see (Fig. 57 par 1
10
0..1
12
2).
BACK
Key
:
Press this key to return to the precedent function see par 1
10
0..1
11
1
NAME
Key
:
Press this key to replace the channel name.
Use the fader under
NAME write or the encoder. To confirm the modify press the
NAME
or
OK
key.
Putting the faders to
0
value
*CUSTOM*
appears on the display
,
now we can write the name of the chan-
nel.
Pressing again
NAME
key the display changes as shown in (Fig. 58).
Through the encoder choose the character, Through the
OK
or
CHAR
Key we insert/modify the next/precedent character.
Press
DONE
key to confirm the modify of the name.
The value change between two scenes can be immediate
(HARD CROSS)
or gradual
(SOFT CROSS).
SOFT X
Key
:
Press this key to set for the selected channel the type of gradual change
(SOFT CROSS).
HARD X
Key
:
Press this key to set for the selected channel the type of immediate change
(HARD CROSS)
BLKOUT
Key
:
Press this key to modify
“BLACKOUT VALUE”
that is the value of the channel when the
BLACKOUT
func-
tion is active ( see par.10.2).
Through the encoder or the fader under the
BLKOUT write, you can select
===
(unchanged) value or
0
/
255
value. The
===
value is selected putting the fader to
0
and it allows to maintain unchanged the output
value (no blackout for this channel).
RESET
Key
:
Press this key to modify
“RESET VALUE”
that is the value of the channel when the
MENU: RESET
function
is active (see par.10.4)
.
Through the encoder or the fader under the
RESET write, you can select
===
(unchanged) value or
0
/
255
value. The
===
value is selected putting the slider to
0
and it allows to maintain unchanged the out-
put value (no reset for this channel).
Only if the
LAMP
or
LAMP/RES
channel is selected you can modify the
LAMP ON /LAMP OFF value
. see (Fig. 59).
L-ON
Key
:
Press this key to modify
“LAMP ON VALUE”
that is the value of the
channel when the
MENU: LAMP ON
function is active (see par.10.3)
.
Through the encoder or the fader under the
L-ON write, you can select
0
/
255
value.
L-OFF
Key
:
Press this key to modify
“LAMP OFF VALUE”
that is the value of the channel when the
MENU: LAMP OFF
function is active (see par.10.3)
.
Through the encoder or the fader under the
L-OFF write, you can select
0
/
255
value.
D
D O
O N
N E
E
Fig. 58
C
C H
H A
A R
R
L
L -- O
O N
N
L
L -- O
O F
F F
F
Fig. 59
s h o w t h e l a m p
on/off value
L
L-
-O
ON
N
1
14
40
0
L
L-
-O
OF
FF
F
0
00
00
0
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
[email protected] - www.amlux.it
