10.8
FUNCTION KEYS IN EDIT DMX PATCH MODE
GB
In
EDIT DMX PATCH
mode there are 6 ffu
un
nc
cttiio
on
n kke
eyys
s see (Fig. 51 par 1
10
0..7
7).
COPY
Key
:
Pressing this key on the display shows "" S
SE
EL
LE
EC
CT
T D
DE
ES
ST
TIIN
NA
AT
TIIO
ON
N U
UN
NIIT
T"",, select through the
1÷12 keys the destination of the copy.
For
the successive
unit use P
PA
AG
GE
E key
LOAD
Key
:
Press this key to load compleate setup from library, see par 1
10
0..9
9.
EDIT
Key
:
Press this key to modify the name of each channel and its parameters, see par 1
10
0..1
11
1.
ERASE
Key
:
Press this key to the erase active unit, select through the 1÷12 keys (for the successive
units use P
PA
AG
GE
E key) the unit that must be erased, then press the E
ER
RA
AS
SE
E key.
The unit will erased in a permanent way, it is not possible recover it.
PATCH
Key
:
Press this key to modify start address of the unit, use the fader under
PATCH write or
the encoder. To confirm the modify press the O
OK
K key, to get out of the function press
the E
ES
SC
C key
.
Matrix will calculate the last channel for that unit and under
PATCH write you can shows
the configuration to set on the dip-switch of the unit.
NOTE: ANY BUILDERS ADOPT THE CONFIGURATION OF THE DIP-SWITCH LIKE
STANDARD SET TO "0" FOR INDICATE DMX CHANNEL "1." IN THIS CASE FOR A
CORRECT OPERATION, YOU MUST BE ADDED +1" (EXAMPLE ADDRESS OF
UNIT START = 128 ---> MATRIX ADDRESS = 129
The on position of the dip-switch is with white box appears aloft.
When you exit from the menù the software controls if there are unit with equal or overlap-
ped addresses, the display shows a message of error "PATCH OVERLAY AT UNIT."
AUTO
Key
:
Press this key to modify start address in automatic way, select through the 1÷12 keys
the unit of start , then press the
AUTO
key.
For
the successive
unit use P
PA
AG
GE
E key
Now from the unit of start to the last unit the addresses have been assigned.
For
the successive
unit use P
PA
AG
GE
E key
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
[email protected] - www.amlux.it
