A P
Prro
og
grra
am
m is a range of scenes (max 48) performed in succession.
To create/modify a program follow all steps listed below:
1) If Matrix is switched off, switch it on pressing
POWER
key.
2) Press
Program
key to activate the
PROGRAM
function.
(the
Program
led key will light up).
3) Press 1÷12 keys to select only the program that you want to modify.
(only one program h
hiig
gh
hlliig
gh
htte
ed
d).
For successive program use the P
PA
AG
GE
E key
4) Press the
UNITS
key and select through the 1÷12 keys the units that must
work in the program. Confirm with the
DONE
key
5) Press
Scene
key to activate the
SCENE
function.
(the
Scene
led key will light up).
6) Press one of the 1÷12 keys to select the scene that we want to create/modify.
For successive scenes use the P
PA
AG
GE
E key
7) Press the
EDIT
key to create/modify the selected scene.
8) Modify the position with the joystick and the sets of the channels with the
relative faders, press
UNIT
key for next/precedent unit.
9) When the scene has been completed, it can be stored through the
SAVE
key.
11) Now Matrix is in the next scene repeat again the 7 and 8 steps.
12) When the creation of the scenes has been finished press
Program
key to
come back to the
PROGRAM
function.
(the
Program
led key will light up).
13) Finally you must press the
GO
key to execute the program.
The program is complete; to create/modify others repeat again all the above
steps.
9.1
CREATION OF A PROGRAM
GB
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
[email protected] - www.amlux.it
