AMLUX Next Matrix, User Manual

Page: 33 / 64

7.2 FUNCTION KEYS IN EFFECT MODE GB
In EFFECT mode there are 6 ffu un nc cttiio on n kke eyys s see (Fig. 32 par 7 7..1 1)
GO key :
Press this key to start the effect.
The key becomes
PAUSE
the display changes as shown in (Fig. 34 par 7
7..3 3)
PAUSE key :
Press this key to stop the effect in the current position, pressing the G GO O key it
recovers from the same position.
SELECT key :
Pressing this key it is possible the multiple selection of the effect. The display
changes as shown in (Fig. 34) see par 7
7..3 3
Press one of the 1÷12 keys to select more effect .
For successive effects use the P
PA AG GE E key.
REPEAT key :
Press this key to modify the number of repetitions of the effect, the value is in
number from 001 to 999 use the faders under the
REPEAT writing, or the
encoder. To confirm the modify press the O
OK K key, to get out of the function
press the E ES SC C key.
2ndROW
key :
For faced or disposed on more rows scanners.
Press this key to modify the effect of the second half of the selected scanner.
The modalities are:
NORMAL: No modification.
NO DELAY:
Keep the first scanner in phase, if there are
DELAY
.
INV PAN: Reverses the movement of the mirror X axis
INV TILT:
Reverses the movement of the mirror Y axis
INV ROT: Reverses the direction of the shape execution.
Use the fader under 2ndROW write or the encoder. To confirm the modify
press the O
OK K key, to get out of the function press the E ES SC C key .
EDIT Key:
Press this key to create/modify the active effect, see par 7 7..5 5.
UNITS keys :
Press this key to set what unit will be active in the effect.
For successive units use the P
PA AG GE E key.
Distribuited by:
AMLUX s.r.l.
46042 Castel Goffredo (MN)
info@amlux.it - www.amlux.it