Amity Technology 3200, Operating Manual

Page: 21 / 77

5 - 2
5.3 Attaching PTO Driveline
CAUTION: To avoid bodily injury or death, shut off the
tractor and lower the machine to the ground before
attaching the PTO driveline.
IMPORTANT: Keep the driveline and powershaft
splines clean of dirt, paint, and debris.
1. Shift to park, disengage the PTO, lower the ma-
chine to the ground, relieve hydraulic pressure,
stop the engine, and remove the ignition key.
2. Raise the tractor PTO shield.
3. Lubricate splines on tractor PTO output shaft.
4. Pull back on the PTO collar until it latches.
5. Align the splines between the defoliator driveline and the tractor PTO shaft. Push the driveline
onto the shaft until the collar snaps forward on the yoke.
6. To ensure the PTO is secure, pull back on the shield. Do not pull on the collar, as this will release
the latch.
7. Lower the tractor PTO shield.
5.4 Using Stands
CAUTION: Always use stands when working on, near, or underneath the defoliator.
Figure 5 - 3: Attached PTO Driveline
Figure 5 - 4: Amity Stand