Amity Technology 3200, Operating Manual

Page: 45 / 77

7 - 18
Manual mode:
1. Ensure you have run the necessary steps in 7.9.1 before operating.
2. Deselect the “ AutoLevel ” button on the options. It should appear as unsuppressed and gray.
3. Raise the rear sensor baskets if you are not scalping. Sensor baskets should remain raised when
in Manual mode.
4. Engage the pto so the “ Pto Sensor ” on the home page turns green.
5. Press “ Begin Row ” when you are ready to start defoliating. Defoliator will set the hitch cylinders
to the “ Hitch Height ” setting on the home page, and the rear left and right cylinders to their re-
spective “ Left ” and “ Right ” values on the options page.
6. Adjust “ Hitch Height ”, “ Left ”, and “ Right ” to desired levels for proper defoliation of beets, refer
to section 7.2.2.
7. After defoliating each row, press “ End Row ” before turning.
WARNING : Not pressing “ End Row ” and/or not lifting sensor baskets after a row or while turning
can result in damage to the machine. Follow all safety precautions when operating AHC in Manual
mode
8. Return to step 5 and repeat process on each row as needed.
Pictures for reference included below: