21
Click to return to the contents section
Installation
Making good the wall
Taping the seam
• Allow the filler to dry completely then
apply 50mm (2”) plaster jointing
scrim tape to the border as shown
below.
Paper tape can also be used. Use usual
methods to apply paper tape (wetted
if necessary and set into wet joint
compound).
Care should be taken that the paper tape
is completely covered and embedded
in the compound to avoid resonance or
becoming a diaphragm.
NOTE: Place the joint scrim as close to
the raised front surface as possible.
It may take some days for the
perimeter fill to dry fully.
Making good the wall
Apply plaster primer
• Using a locally sourced plaster
primer, apply one coat to the face of
the ALF100SM.
• Allow the primer to dry.
PLASTER
PRIMER