AMIMON AMN12310 WHDI Datasheet Download Page 2

Important Notice 

Version 0.5 

 

 

AMIMON Confidential 

 

Important Notice 

AMIMON Ltd. reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products 
and  services  at  any  time  and  to  discontinue  any  product  or  service  without  notice.  Customers  should  obtain  the  latest  relevant 
information  before  placing  orders  and  should  verify  that such  information  is  current and  complete.  All  products  are  sold  subject  to 
AMIMON's terms and conditions of sale supplied at the time of order acknowledgment. 

AMIMON  warrants  performance  of  its  hardware  products  to  the  specifications  applicable  at  the  time  of  sale  in  accordance  with 
AMIMON's  standard  warranty.  Testing  and  other  quality  control  techniques  are  used  to  the  extent  AMIMON  deems  necessary  to 
support  this  warranty.  Except  where  mandated  by  government  requirements,  testing  of  all  parameters  of  each  product  is  not 
necessarily performed. 

AMIMON assumes no liability for applications assistance or customer product design. Customers are responsible for their products 
and applications using AMIMON components. To minimize the risks associated with customer products and applications, customers 
should provide adequate design and operating safeguards. 

AMIMON  does  not  warrant  or  represent  that  any  license,  either  express  or  implied,  is  granted  under  any  AMIMON  patent  right, 
copyright,  mask  work  right,  or  other  AMIMON  intellectual  property  right  relating  to  any  combination,  machine,  or  process  in  which 
AMIMON  products  or  services  are  used.  Information  published  by  AMIMON  regarding  third-party  products  or  services  does  not 
constitute a license from AMIMON to use such products or services or a warranty or endorsement thereof. Use of such information 
may require a license from a third party under the patents or other intellectual property of the third party, or a license from AMIMON 
under the patents or other intellectual property of AMIMON. 

Reproduction  of  information  in  AMIMON  data  books  or  data  sheets  is  permissible  only  if  reproduction  is  without  alteration  and  is 
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an 
unfair and deceptive business practice. AMIMON is not responsible or liable for such altered documentation. 

Resale of AMIMON products or services with statements different from or beyond the parameters stated by AMIMON for that product 
or service voids all express and any implied warranties for the associated AMIMON product or service and is an unfair and deceptive 
business practice. AMIMON is not responsible or liable for any such statements. 

All company and brand products and service names are trademarks or registered trademarks of their respective holders. 

 

Contact Us 

US Office 

2350 Mission College Blvd. 
Suite 500 
Santa Clara, CA 95054  
Tel: +1 650 641 7178 

 

Israeli Headquarters 

2 Maskit St. 
Building D, 2nd Floor  
P.O.Box 12618 
Herzlia 46733, Israel 
Tel: +972-9-962-9222 
Fax: +972-9-956-5467 
[email protected] 

Japan Office 

FS Building 9F.  
1-14-9 Higashi-Gotanda Shinagawa-ku  
Tokyo 141-0022,  
Japan 
TEL +81-3-3444-4305        
[email protected] 

 

Summary of Contents for AMN12310 WHDI








































Reviews: