amiad Filtomat MG-110P, Installation, Operation And Maintenance Instructions

Page: 28 / 51

MG110P
7.2013 Page 28 of 51
Define controler
Press code - XXX
Example: Changing the Delay Parameter from 10 to 37:
Press the Right Arrow Key to delete the “10” digits.
Use the Up or the Down Arrow Key to select "3".
Press the Left Arrow Key to push the “3” to the left.
Select "7" by using the Up or the Down Arrow Key.
Press Enter.
Setting the Real Time Clock
Once power is first connected to the controller the real time clock needs to be set. This is done at screen number 11.
Number Screen Description
11
Set time
18/12/05 03:11
Navigate to this screen, press Enter and set the controller’s clock
according to your local time zone and date.
Note: do not change the clock
setting while flushing.
E. Configuration
After the installation of the controller and prior to the first operation it is necessary to perform the configuration process
in order to synchronize the controller with the filters it be flushed.
Start the configuration process by navigating to screen number 13 and entering 123 in the code field.
Important notes:
Never change the controller’s configuration while flushing.
Once the controller is configured EXIT the configuration process, the controller is not operational while in
configuration mode.
(C)