AMI M920 Series User Manual Download | Manualshive

Page: 1 / 47

background image

Mainboard User’s Manual

This publication, photographs, illustrations and software are under
the protection of international copyright laws and all rights
reserved. It does not allow any reproduction of this manual,
content and any materials contained herein without the written
consent of the authentic manufacturer.
The information in this manual is subject to change without notice.
The manufacturer does neither represent nor warrant the contents
hereof; and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Furthermore,
the manufacturer reserves the right to revise and change this
publication from time to time, without the obligation of notifying
any person of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium, Pentium-II, and MMX are registered trademarks of
Intel Corporation.
Microsoft, MS-DOS and Windows 95/98/NT/2000/XP are
registered trademarks of Microsoft Corporation.
PC-cillin is a trademark of Trend Micro Inc.
AMI is a trademark of American Megatrends Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
It has been acknowledged that all mentioned brands or product
names are trademarks or registered trademarks of their respective
holders.

Copyright © 2002

All Rights Reserved

M920 Series, V1.3A

VT8753/January 2002

1
2
3
...
»

Summary of Contents for M920 Series
















































Reviews:

No comments

Related manuals for M920 Series

Brand: Yamaha Pages: 232

Brand: ECS Pages: 56

Brand: Linear Pages: 10

Brand: AOpen Pages: 105

Brand: DFI Pages: 99

Brand: Texas Instruments Pages: 101

Advanced Socket 370

Brand: BCM Advanced Research Pages: 38

MBATX-845GV-VEAH

Brand: Kontron Pages: 70

NuMicro NuTiny-SDK-NANO100

Brand: Nuvoton Pages: 18

Brand: AOpen Pages: 8

Brand: IBASE Technology Pages: 91

HBJC390F841VAG34B

Brand: JETWAY Pages: 44

Brand: MATSONIC Pages: 39

Brand: MSI Pages: 126

Brand: Intel Pages: 10

Brand: SMSC Pages: 42

Brand: ECS Pages: 71

Brand: Gigabyte Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands