Mainboard User’s Manual
Installation Procedure
The mainboard accommodates two
memory modules. You must
install at least one module in any of the three slots. Each module
can be installed with up to 1GB system memory.
Refer to the following to install the memory modules.
1. Push the latches on each side of the DIMM slot
down.
2. Align the memory module with the slot. The
DIMM slots are keyed with notches and the
DIMMs are keyed with cutouts so that they can
only be installed correctly.
3. Check that the cutouts on the DIMM module edge
connector match the notches in the DIMM slot.
4. Install the DIMM module into the slot and press it
firmly down until it seats correctly. The slot latches
are levered upwards and latch on to the edges of the
DIMM.
5. Install any remaining DIMM modules.
12
Summary of Contents for M920 Series
Page 4: ...Mainboard User s Manual IV ...
Page 30: ...Mainboard User s Manual 26 ...
