Page 18
Sound & Speaker Set Up
The Rock-Star Lx incorporates a 1600 Wrms Power
Amplifier for the speakers. In its default configuration,
the Power Amplifier is connected to the Pre-Amplifier
INT outputs, and volume is adjusted by using the IR
Transmitter. The output of the Power Amplifier is
connected to the 70251-A Audio Transformer unit
which matches power output from the amplifier to
speaker loads. In addition, outputs for 70-volt CV
systems are provided. Note: The 70-volt CV Taps are
rated 150W max per channel.
If more power is required for an installation, the 1600
Wrms amplifier may be replaced with a 2,600 Wrms
Power Amplifier. This optional amplifier may NOT be
used with the 70251-A Audio Distribution
Transformer.
The figure below is a representation of the Audio
Transformer Assembly. Its purpose is to match the
external speaker load to the Peavey Power Amplifier
output so that the optimum amount of power is
delivered to the extension speakers.
For best performance, speakers should be connected
to the highest tap that will not result in an overload.
An overload is defined as any connection scheme
that will cause higher power consumption than the
amplifier is capable of delivering.
The rest of this section assumes that standard equipment – the PV-1600 Power Amplifier and Audio
Transformer Assembly – is used. It is also assumed that you are familiar with the Amplifier Description and
Operation section.
Figure 2-C – Audio Transformer Assembly 70251-A
WARNING: Do NOT
use the 70251-A
Audio Transformer
Assembly with a
PV-2600 Power
Amplifier.
Summary of Contents for Rock-Star Lx
