COPYRIGHT © 2011 AMI ENTERTAINMENT NETWORK, INC.
PM0721-09 MEGATOUCH ION RX OWNER’S MANUAL
6
Software Update Cable
Discs have been provided with your game in the event that you need to reinstall the
software at any time. The included SATA update cable may be required for software updates
depending on the type of SATA DVD drive you have. It is needed for use with internal SATA DVD
drives, so make sure to keep the cable for any future disc-installed software upgrades. It should
be connected to the game as shown in the figure below.
Connecting a SATA DVD Drive
•
Turn off and unplug the game.
•
Unlock and open the cabinet by lifting the bezel from the rear of the unit.
•
Locate the unconnected end of the software upgrade power cable, routed near the
hard drive (see figure below for reference). Connect this cable to the SATA power cable
input on the back of your SATA DVD drive.
•
Connect the SATA data cable (either the one that came with your external DVD drive,
or the provided cable that came with the game) to the software upgrade data port
inside the game (see figure below). Connect the other end of this cable to the SATA data
cable input on the back of your DVD drive (refer to figure below).
•
Plug in and turn on the game and continue with the software update as normal. When
finished, we recommend that you keep the provided SATA data cable connected to
your DVD drive and only connect it to the update port inside the game during updates.
SOFTWARE UPGRADE
DATA PORT
PROVIDED SATA DATA CABLE
(FOR USE WITH INTERNAL
SATA DVD DRIVES)
SATA DATA
CABLE INPUT
SATA POWER
CABLE INPUT
SOFTWARE UPGRADE POWER CABLE
(LOCATED INSIDE THE GAME,
ROUTED NEAR HARD DRIVE)
REAR VIEW OF
SATA DVD DRIVE
FIGURE B - INTERNAL VIEW OF MEGATOUCH RX
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200