COPYRIGHT © 2011 AMI ENTERTAINMENT NETWORK, INC.
PM0721-09 MEGATOUCH ION RX OWNER’S MANUAL
4
inserted straight onto the header and
that the connector covers all header
pins.
•
Do not connect any peripheral device to
the board if the power is still connected
to the peripheral, or if power is already
applied to the board.
CAUTION
: Be extremely careful when re-
placing the lithium battery on the
motherboard. There is a danger of explo-
sion if the battery on the motherboard is in-
correctly replaced. Only replace the battery
with the same type recommended by the
manufacturer. Dispose of used batteries ac-
cording to the manufacturer’s instructions.
Cleaning the Cabinet
•
The cabinet should be cleaned with a
damp cloth and mild detergent. Always
apply the cleaner to the cloth and not
directly on the game. Liquids could en-
ter the cabinet and damage electronics
inside.
Cleaning the Touchscreen Monitor
•
The touchscreen glass should be
cleaned with a damp cloth and isopro-
pyl alcohol or a
non-ammonia
cleanser.
Do not use any abrasive or vinegar-
based cleansers, as they will damage
the touchscreen glass
.
NOTE:
DO NOT USE ANY ABRASIVE
SOLVENTS, ACID OR VINEGAR-BASED
CLEANSERS ON THE MONITOR OR
DECALS. OVER TIME, SUCH CLEANSERS
COULD HARM THE TOUCHSCREEN AND
ERASE THE DECALS. BE CAREFUL NOT
TO USE COMMERCIAL CLEANERS CON-
TAINING ANY OF THESE SUBSTANCES.
Cleaning the Fans and Vents
•
The fans and vents should be cleaned
of any dust and grime on a regular
basis to ensure proper ventilation of
the game.
•
To ensure proper operation of the
game, it is important that all fans are
operating correctly and that the airflow
is unobstructed. Make sure nothing is
placed inside the cabinet or next to the
fan vents that would inhibit the flow of
air. Also, if any fans are not operating,
it is important that they be replaced.
Watchdog Timer
This game has been equipped with a feature
that allows it to automatically reboot if it en-
counters a problem. The watchdog timer will
reboot the machine within 5 minutes after a
failure, allowing the game to automatically re-
set itself if a problem arises without needing a
technician present.
Power Cord Security
Use the provided tie wrap to secure the
power cord to the U-bolt on the back of the
game (see Figure 33 at the rear of this
manual).
This will prevent unnecessary strain or ac-
cidental removal of the cord if the game is
turned or moved.
NOTE: Make sure that the plug is fully seated
in the game after attaching it to the U-bolt.
Optional Rx Cover
There is an optional vinyl cover for the Rx (part
number: HW0339-01) that can be ordered
through your distributor. This cover can be used
to better protect your Rx while not in use.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
