Released 06/2010
E-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
DECO 2000
1-20
C MACHINE CONTROLS
8. ADJUSTING THE MACHINE - PICK STITCH
To the customer order it is possible to adjust the machine by a mechanical mechanism called the
Bender to sew a Pick Stitch which simulates a hand stitch.
To change the Standard style stitch to Pick Stitch see 1-44,45. After the machine is adjusted to sew
a Pick Stitch , the Pick Stitch style
Ê
is shown on the screen.
A true “Pick Stitch” can be sewn if the optional bender plate has been fitted. This options gives the
advantage of placing a small stitch on each side of the fabric with a space between each stitch.
This is achieved by the Bender Plate raising the fabric prior to each stitch, thereby creating a small
amount of fullness in the fabric between each stitch. When sewing the pick stitch, move the angle
plate locking latch lever 31000032 down. To disable the Bender from the operation, move the latch
lever up.
To adjust the Pick stitch length
see chapter 4
, to adjust the sewing speed follow the instructions in
chapter 3
.
If the Pick stitch is selected no other stitch style can be used.
To sew another stitch style it is necessary to set the machine back to the Standard stitch.
The basic difference between the Standard Stitch and Pick Stitch:
Ë
Ì
Ë
Thread
Ì
Sewn material
UP
SPEED 310
-
+
READY
PICK STICH
EDIT
500
150
EDIT
PICK STICH
OK