ATX
6
21
(1) Enter the function menu and use “(
-
)”
or “(+)” button to access SUBTR function.
(2) Press “Enter” button to get into SUBT
R function interface.
(3)
Use “(
-
)” or “(+)” button to
select
ST channel, press “Enter”
key, and the initial value of ST will blink. Use
“(
-
)” or “(+)” button to adjust the center.
(Note: In the interface of adjusting the value, return to the initial value "0" by
pressing “(
-
)” and “(+)” buttons
simultaneously for about 1 second.)
(4) Press “Enter”
key, the adjusted value stops blinking, now the center of ST has been adjusted.
(5) TH channel and CH3 can be set similarly.
(6) When ending setting, return to the initial screen by pressing “Exit” button twice.
4.13 Servo Reverse
„
REV
“
This function reverses the direction of operation of the servos related
to transmitter steering, throttle, channel 3, channel 4, channel 5 and
channel 6 operation.
Channel
ST: Steering (CH1)
TH: Throttle (CH2)
CH3: Channel 3 (VR)
CH4: Channel 4 (SWA)
CH5: Channel 5 (SWB)
CH6: Channel 6 (SWC)
(1) Enter the function menu and use “(
-
)” or
“(+)” button to access REV function.
(2) Press “Enter” button to get into REV function interface.
(3)
Use “(
-
)” or “(+)” button
to select
ST channel, press “Enter”
key, and
the “NOR”
will blink.
(4)
Press “Enter” key,
the “NOR”
stops blinking, Use “(
-
)”
or
“(+)”
button to reverse the ST servo operation
direction.
(5) TH channel, CH3, CH4, CH5 and CH6 can be set similarly.
(6) When ending setting, return to the initial
screen by pressing “Exit” button twice.
4.14 Steering Dual Rate/Throttle Dual Rate "D/R
”
Dual Rate
The steering left and right servo travels are adjusted simultaneously. When you want to increase the servo
travel, adjust the + side. When you want to decrease the servo travel, adjust the - side.
