BEDIENUNGSANLEITUNG/MANUAL BINARY V2
28
5.
There is cord loop which attached to the silicone ring on central spar, use this cord loop to attach to hook underneath the jib
boom. Adjust the silicone ring to pull cord tight.
6.
Use jib boom cord to thread through the second boom bend eye (from front side back to rear side) located in central spar,
thread through the sheeting deck eyelet on forward cross beam, attach cord loop to the pin as picture shown.
7.
Use main boom cord to thread through sheeting deck eyelet on center of cross beam, then thread through sheeting deck eyelet
on forward cross beam, attach cord loop to the pin as picture shown.
