BEDIENUNGSANLEITUNG/MANUAL BINARY V2
29
8.
Adjust B & C silicone ring on main boom to adjust the main sail radian as picture shown.
BATTERIEN FÜR EMPFÄNGER EINLEGEN
Always switch on the transmitter before switch on the receiver and always switch off the receiver before switching off the
transmitter.
1.
Push down the sail control stick (left stick) to the lowest position, then switch on transmitter.
2.
Install three AAA batteries into the receiver box, make sure the correct polarity. Then fix battery box well with Velcro strap.
3.
Switch on the receiver by pushing the pushrod forward to position “on”. This moment the receiver green light will be on and
steering servo and sailing servo in boat are under control correspondingly of radio control.
