Diagnostics
|
7-5
inject gas
Use the left and/or right navigation arrows to locate the Inject Gas menu
and press the
EntEr/mEnu
key
.
Use this menu to test the flow of gas to
the analyzer.
1. Use the navigation arrows to select the gas to inject and press the Enter/
mEnu
key. An “X” appears in the check box of the option selected.
2. Navigate to the START button; press the Enter/
mEnu
key to inject the
gas.
Figure 7-2. Diagnostic Mode. inject gas screen.
Pressing the EntEr/mEnu key to start the test will turn on the
Diagnostic mode.
3. Press the
EntEr
/
mEnu
key to end the test and return to the Inject Gas
screen. It will also turn Diagnostic Mode Off.
4. Press the
CAnCEL
key to exit from the menu.
Summary of Contents for Thermox WDG-VRM
