Ametek Thermox WDG-VRM, User Manual

Page: 72 / 104

6-10 | Thermox WDG-V
RM
Perform a Remote Calibration
The functions for remote calibration will only be visible if you have and
RCU and you have configured your sensor for Automatic Calibration
in the Sensor Configuration menu.
Using the Remote Cal Unit (RCU), the user manually accepts the gas values when
each gas is stable by pressing the ENTER/MENU key, but the RCU switches the
gases on/off automatically.
1. From the Main Menu screen, press the ENTER/MENU key to access the Cali-
bration Menu.
2. Use the left and/or right navigation arrows to locate the Start Calibration menu
and press the ENTER/MENU key.
3. Navigate to the drop down box, press the ENTER/MENU key and choose “Re -
mote.”
4. Press the right arrow to continue.
5. Select the gas(es) that you want to calibrate.
6. Enter the time for the Recovery Duration in minutes.
7. Press the right arrow to continue.
This is the Calibration Gas Values screen. If you have already entered
your calibration gas values in the Cal Gas Menu, they will be visible in
the fields. Any changes that you make to these values will be reflected
in the Cal Gas Menu as well.
8. When you are satisfied with your values, press the ENTER/MENU key to start
the remote calibration. The screen displays the Gas Value, Cal Gas and Status
(Ready/Wait). To abort the calibration, navigate to the ABORT button and press
the ENTER/MENU key.
NOTE

NOTE
