Calibration
|
6-3
Cal Gas Values Menu
Use this menu to set and save the calibration gas values for the sensor you have
chosen. These values will be used when calibrating the sensor. This menu provides
a way for the user to select the values before calibrating the analyzer. However, if
the values are not set here, they can still be set during the calibration process under
the Start Calibration menu.
Figure 6-2a.
Cal Gas Values Menu
Figure 6-2b.
Set Cal Gas Values
Figure 6-2c.
Start Calibration Menu
Figure 6-2d.
Calibration Gas Values
1.
From the Main Menu screen, press the
ENTER/MENU key to access the Cali-
bration Menu.
2.
Use the left and/or right navigation arrows to locate the Cal Gas Values menu
and press the ENTER/MENU key.
3.
Enter the values for the gases available for the sensor you have designated on
the Home screen.
4. Press the ENTER/MENU key to
ACCEPT the values you entered.
Summary of Contents for Thermox WDG-VRM
