Ametek Thermox WDG-1200 Insitu, User Manual

Page: 67 / 100

User Interface / Calibration
|
4-25
The ‘Status and Calibration Start’ register 20 is used both to trigger a calibration
and to monitor the instrument status. The meaning of each bit is as shown in the
table below:
bit Meaning
0 (LSB)
Start Calibration.
Write “1” to start calibration
1 Zero Calibration acknowledged
2 Span Calibration acknowledged
3 to 9 Not used
10 Failed in Calibration
11 Cold Junction Error
12 Cell too hot
13 Zero Coefficient out of range
14 Span Calibration out of range
15 (MSB)
Temperature out of range
(± 5 degrees)