Ametek Reichert ClearChart 4P User Manual Download

Page: 13 / 52

13785-101 Rev. F

Installation, Features, & Functions

(continued)

Articulating Wall Mount

(continued)

Attaching the ClearChart 4P to the Mount

1. Align the half of the mount that was removed in the previous steps to the back of the ClearChart

4P, aligning it with the screw holes. Refer to Figure SU-10.

Figure SU-10 Align Holes and Attach Mount

Screw

Holes

Align Outer

Holes

Install

Thumb Screws

Note:

There is a slot on the back of the mount. Be sure this slot remains

in the vertical position when aligning the mount to the back of the

ClearChart 4P. Refer to Figure SU-11.

2. Using the Thumb Screws, secure the mount to the ClearChart 4P by

hand-tightening the 4 screws into the outer screw holes on the back of

the case of the ClearChart 4P. Refer to Figure SU-10.

Note:

The screws must make at least three full turns into the mounting hole

and fit snugly into place. Do not over tighten.

3. Slide the ClearChart 4P onto the mounting bracket that is already attached

to the wall, so the square slides into the slot on the mount. Refer to Figure

SU-12.

4. Secure the mount by tightening the two small flathead screws on either

side of the mount where the ClearChart 4P attached to the wall mount.

Refer to Figure SU-13.

Figure SU-11 Align

Slot Vertically

Figure SU-12 Attach ClearChart 4P to Wall Mount

Slide

Down

Side

View

Attached to Wall

Back of ClearChart 4P

Attached

to Wall

Attached to

ClearChart 4P

Securing

Screw

Figure SU-13 Securing Screws

Summary of Contents for Reichert ClearChart 4P





















































Search results

Summary of Contents for Reichert ClearChart 4P

Reviews:

Related manuals for Reichert ClearChart 4P

Brands by name

Popular brands

Ametek Reichert ClearChart 4P, User Manual

Search results

Summary of Contents for Reichert ClearChart 4P

Reviews:

Related manuals for Reichert ClearChart 4P

Brands by name

Popular brands