Ametek ORTEC radEAGLET, User Manual

Page: 81 / 140

radEAGLET User Manual radEAGLET Advanced Operations
5.23 Set Password
You can (and should) change the password of your radEAGLET to prevent unauthorized
changes of protected settings.
After you confirmed that you want to set a new password (Fig. 82 , p. 81 ) just enter the new
password as described in see 2.2.4 , p. 24 .
Make sure to remember your changed password. Passwords cannot be deciphered
at the factory.
Figure 82: Setting the password
5.24 Factory Settings
This command re-establishes the factory settings of your radEAGLET . You have to confirm
this command (Fig. 83 , p. 82 ).
Reset
Discard all your changes to the settings of the radEAGLET and re-establish the factory
settings.
This includes the password for the protected settings (see 2.2.4 , p. 24 ).
Exit
Return to the superior screen.
5.25 Collect Reachback
This command initiates a collection of measurements for a reachback SOP. Initially, the col-
lection is empty.
© innoRIID GmbH • 2018-10-24 Software 3.2.0 • Document 3.2.2o 81/140