Ametek ORTEC radEAGLET, User Manual

Page: 27 / 140

radEAGLET User Manual Using the radEAGLET
2. Position the supplied KCl (pottasium chloride) box (Fig. 14 , p. 27 ) in front of the detec-
tor cap.
Figure 14: Box with potassium chloride (KCl) for stabilization and calibration
3. Press and hold down the I key (Fig. 6 , p. 22 ).
4. After a couple of seconds the instrument begins to boot when the alarm LEDs (Fig. 1 ,
p. 14 ) begin to flash.
5. You are welcomed by the start-up screen with dots appearing from left to right
(Fig. 15 , p. 27 ).
Figure 15: Starting the radEAGLET
6. The radEAGLET begins an initial stabilization (see C.1 , p. 125 for details) (see 16 ,
p. 28 ).
7. When the stabilization source is identified it is shown (see 17 , p. 28 ).
© innoRIID GmbH • 2018-10-24 Software 3.2.0 • Document 3.2.2o 27/140