Page 35
User Guide
LSP Ex System for Zone 22
Linescanner Head
9 Installation Accessories
9.1 Right Angle Mounting Bracket (Land Part Nº 031.438)
This mounting bracket is supplied with fixtures and is pre-drilled to allow
mounting to the Water Cooled Air Purge Baseplate, which is integrated within the
Hotspot IR Ex head.
9.2 Plate Mounted Blower Unit (Land Part Nº 099.471)
The Plate Mounted Blower Unit provides conditioned air to the purge system in
use.
9.3 Terminal box with power (Land Part Nº 802662)
This accessory is recommended where the distance between the scanner head
and processor dictates the need for a separate power supply. It may also be
used for signal splitting.
9.4 Terminal box without power (Land Part Nº 802869)
For reduced cost, this accessory can be used to split the scanner signals into two
cables, one with data-critical signals and one with the other signals.
9.5 Low cost floatline housing (Land Part Nº 802663)
This rugged housing is recommended for use in floatline applications where an
automatic shutter and flow sensing are not required.
9.6 Housing for light steel applications (Land Part Nº 802664)
This rugged housing is recommended for use in light steel applications.