7-8 | DYCOR LCD RESIDUAL GAS ANALYZER WITH SYSTEM 2000 SOFTWARE
Figure 7-7.
Input and output
channel setup for I/O
option board.
Figure 7-6.
device properties
screen.
Configuring System 2000 Software
Entering device properties
•
Go to the main menu of the System 2000 software and under “Edit” on the
toolbar select “Device Properties.” Select your LCD device from the sub-
menu. The Device Properties screen appears (Figure 7-6).
•
Click on the I/O Setup Tab to set up and name the input and output channels.
Input tab
•
Type in a name for the Analog IN and Digital IN channels (Figure 7-7).
Output tab
•
Type in a name for the Analog OUT and Digital OUT channels (Figure 7-7).
