A-10 | DYCOR LCD RESIDUAL GAS ANALYZER WITH SYSTEM 2000 SOFTWARE
Older I/O systems had a single digital input or output per module.
The SNAP I/O system combines four inputs or outputs into one
module. For the SNAP I/O system, the Process 2000 module number
refers to a particular digital I/O channel, not the physical module.
For example, if a single digital output module is installed in the first
SNAP rack position, the Process 2000 will refer to it as Modules 0, 1,
2 and 3. See Figure 2 – B3000 I/O Mapping and Example.
Add Display for Digital module
• To create displays so that you can view the data being monitored, go to the
mode display where you want your information viewed. Right-click on one
of the screens.
NOTE
• Click
Scan
.
• Click
Device
and select your digital device.
• Click the
Display
tab to configure the parameters for the display.
• Click
OK
for it to become part of the mode display you have chosen.
