Ametek ASR900, Installation And Maintenance Manual

Page: 83 / 92

Service and Parts
|
5-3
Recommended Spare Parts
To avoid lengthy maintenance delays, be sure to have on-site all parts
that are being replaced prior to disassembling the HAG Probe valve
assembly.
Content is subject to change without notice.
The “ Drawing No. ” in parentheses below the “ Part No.” in these spare
parts lists indicates the drawing to refer to in Chapter 6 for the location of
the part in the analyzer.
Preventive Maintenance Spare Parts
HAG Sample Probe
Part No.
(Drawing No.) Description
1 Year
QTY
2 Year
QTY
301-1713
(100-2196)
Sintered Disk, 52 mm diameter
(HAG Sample Probe)
4 8
301-1714
(100-2196)
Hi-Flow Filter Membrane, c/w Buna O-Ring
(HAG Sample Probe)
4 8
300-8722
(100-2196)
O-Ring, Aflas, size 118
(HAG Sample Probe)
4 8
300-8719
(100-2196)
O-Ring, Aflas, size 121
(Valve Cover, HAG Sample Probe)
8 16
300-4651
(100-2196)
O-Ring, Silicone, 2-014
(Aspirator Insert, HAG Sample Probe)
4 8
300-4958
(100-2194 and
*100-2196)
O-ring, Viton, size 008
(Fiber Filter Assembly, HAG Sample Probe)
4 8
100-2193
(100-2194 and
*100-2196)
Fiber Filter Element
(Fiber Filter Assembly, HAG Sample Probe)
4 8
300-6242
(100-2194 and
*100-2196)
O-Ring, Aflas, size 115
(Fiber Filter Assembly, HAG Sample Probe)
4 8
* Refer to drawing 100-2196 for the location of Fiber Filter Assembly in the Sample Probe and drawing
100-2194 for the Fiber Filter Assembly.

NOTE