Ametek 5100P, User Manual

Page: 47 / 83

PN 9000-246-VE, Rev D
Closing the 5100P Application Software
After you are finished communicating with the analyzer, close the Application
Software and disconnect the computer from the analyzer:
1. From the 5100P Application Software, click the X in the upper-right corner
of the window.
2. The message “ Exit 5100P TDLAS Windows Application? ” will appear.
Click Yes to exit, or No to continue working with the software.
3. If you are finished working with the 5100P Analyzer, press the Power On/
Off key to power down the analyzer.
4. Disconnect the USB cable from the computer and from the USB port on
the 5100P. Replace the Dust Cap on the USB Data Connection Port On the
Rear Panel of the 5100P Analyzer.
Figure 3-14.
5100P USB Data Connection
Port, dust cap on.
Battery Charger Port
(and Dust Cap)
USB Data Connection Port
(and Dust Cap)
Enclosure Vent
User Interface/5100P Application Software
|
3-19