Ametek 5100P, User Manual

Page: 40 / 83

PN 9000-246-VE, Rev D
3. Select the unit you wish to use and press
Enter
to enable Edit mode for
that parameter (for some units, you will be prompted with “
NEW? _
”).
4. After the Unit has been changed, you can back out of the
Units
screen by
pressing the
Esc
key.
Changing the User Interface Display Contrast
The display Contrast configuration screen allows you to change the contrast of
the display to the level that best suits the ambient lighting.
Decreasing the display contrast too much prevents the display from
being visible; exercise caution when setting this parameter.
Figure 3-9.
Configure Contrast screen.
CONFIG
CONTRAST
Press Up/Down Arrow
To change the display contrast:
1. From the
CONFIG
menu, use the
Up
or
Down
arrow keys to select
Con-
trast
. Press
Enter
to enable Edit mode.
2. Use the
Up
arrow key to increase the display contrast.
Use the
Down
arrow key to decrease the display contrast.
3-12 | 5100P TDLAS Analyzer