Ametek Land 4750-PM, User Manual

Page: 60 / 64

Particulate Measurement System
User Guide
4750-PM
7
Resetting the Sensor
CAUTION!
Loss of Data. Performing a Reset can stop the sensor from
working!
A reset will put all instrument settings back to their default
values.
The procedure given in this section must, therefore, be carried
out only by suitably trained and qualified personnel.
This function may be used to reset the sensor, if necessary.
1) Switch to and scroll DOWN to the
ENG (Engineering) menu.
2) Press RIGHT to access the RSET submenu.
3) Press RIGHT again to display 0000 and press UP to set the value to
0001 .
4) Press RIGHT to activate the factory reset.
7 - 0