31
98-0157 Rev K
To manually begin a heat disinfect from the OPERATION MENU, press RO HEAT
DISINFECT. The controller will ask you to confirm, press YES. The MediQA will
automatically complete the heat disinfect cycle.
Upon completion of the RO heat disinfect, verify the unit reached the disinfect
temperature. Go to MAIN MENU > ACTIVITY LOG and scroll through the data until
you see the tank temperature in RED numbers. Insure the unit held 185°F for 30
minutes.
Before programming the MediQA, consult the facility manager for operating and
maintenance schedules that require water to complete.
Warning: The supply schedule and heat disinfect schedule may not
interfere with pretreatment backwash/regeneration schedule.
To complete set up, navigate SETTINGS MENU > RO SUPPLY > SUPPLY TIME
SCHEDULE ENTER to get to the screen shown below. Enter the times necessary for
the RO to supply water each day, using 24:00 clock. If there are days no operation
is necessary then enter a start and end time of 00:00. When in TIMER mode the
machine will operate on this schedule. See Section 6.4.1 for details about this
screen. See Section 6.1.1 for information about CONTINUOUS versus TIMER mode.
Summary of Contents for MediQA MDP Series
