47
98-0157 Rev P
6.5.2
RO Parameters Screen
In the RO parameters menu, the target percent recovery for the RO can be set. The default is 65%
for stage 1 and 80% for stage 2 (if the unit is a dual pass). The run time clock can also be reset from
this menu. The measured recovery value for the unit is displayed on this screen to verify that the
unit is performing at, or exceeding, the target recovery.
Single Pass Screen
Dual Pass Screen
Figure 52
Figure 53
6.5.3
Alarm Settings Screen
The Alarm Settings menu allows access to the alarm set-points for various parameters of the unit.
The set-points should be set before the unit is put into service and will only require alteration in
special case situations.
Single Pass Screen
Dual Pass Screen
Figure 54
Figure 55
The set-points on this screen are triggers for system warnings and alarms. If a warning is triggered it
will be displayed and the blue bars surrounding the screen will turn yellow. If an alarm is triggered it
will be displayed, the bars will turn red, and the system will cease operation. The warning or alarm is
triggered if the value exceeds the Loop, Tank, Permeate, or Tank Return Over Temp set-points.
Summary of Contents for 00MDP2-230
