33
98-0157 Rev P
In addition, there is a colored border which is common to most screens. The color indicates the
current status as follows:
Blue:
Function operating to specification
Amber:
Warning active
Red:
Alarm active
“Warning” alarms are advisory; they do not stop system operation. They indicate that some element
of the system needs attention.
“Alarms” stop the system. The system will only restart once the problem giving rise to the Alarm has
been corrected.
The top right of the screen displays the date and time and below this a completion time for the
current operation (only available for certain functions).
Figure 25
TIMER
button
TIMER provides timed operation for the
MediQA. Operation only commences
when reaching times programmed in the
RO SUPPLY TIMER screen and Heat
Disinfect occurs at time programmed in
the RO HEAT DISINFECT screen. If the
timer button is pressed part way through
a timer period, pressing the TRIGGER
button will start operation.
CONTINOUS
button
Starts system operation whether times
have or haven’t been programmed to the
RO SUPPLY TIMER screen. Operation is
continuous until OFF is selected. Since
starting and stopping incorporate essential flushing of the membrane, CONTINUOUS operation
should not be used for extended periods or damage to the membranes may occur.
POWER ON STANDBY
button
Energizes the system but does not start operation. The system will perform a flush and rinse for a
predetermined time, see Section 13.1.
OFF
button
Deselects and switches off selected functions. The button will illuminate red while ending certain
functions.
RO HEAT DISINFECT
button
Starts a manual heat sanitization of the MediQA
CAUTION:
Supply to the distribution loop will cease while RO heat disinfect is in process.
Summary of Contents for 00MDP2-230
