AMERITECH AM8a, Instruction Manual

Page: 52 / 152

AM8a Instruction Manual (18-0037) Emulation Parameters
0037-S03.L_24 February 10, 2000
3-5
DIAL TONE :
EMULATE 2 : T1:dBm/hz
-13 350
T2:dBm/hz
-13 440
DL SNDms
250
15 to 9999 (1ms steps)
dBm = -40 to -3 (1dB steps)
Hz = 0 or 300 to 3300 (1 hz steps)
Alternate:
3.9.1
T1:dBm/hz:
This parameter controls the level and frequency of the first tone of the
composite dial tone signal.
3.9.2
T2:dBm/hz:
This parameter controls the level and frequency of the second tone of the
composite dial tone signal.
3.9.3
DL SNDms:
This parameter is a delay time from seizure to providing the dial tone
when the AM8a is set to
AUTOMATIC
.
3.10 RECALL EMULATE
This menu is used for special calling features such as Call Transfer, Conference Calling, etc.
RECALL :
EMULATE:
HOOKFLASHms
500
15 to 999 (1ms steps)
LINE UNBALms
500
15 to 9999 (1ms steps) Alternate:
3.10.1
HOOKFLASHms:
This is the duration of a Hook Flash generated by the AM8a.
3.10.2
LINE UNBALms:
This is the International version of
FLASH
. The timing is utilized the
same way as flash. The difference is that an unbalance will apply a ground on the
ring lead for the programmed time.