AMERITECH AM8a, Instruction Manual

Page: 49 / 152

Emulation Parameters (18-0037) AM8a Instruction Manual
February 10, 2000 0037-S03.L_
3-2
3.2.2
DC HOLD:
This parameter controls the DC holding resistance placed across Tip and
Ring during an
OFF-HOOK
condition.
3.3 DIALING EMULATE
This menu controls the dialing type and the signal used as a start dial indication.
DIALING :
EMULATE: LOOP TYPE
pulse
dtmf
mf(R1)
START SIGNAL
wink
Immediate
delay
dial tone
Alternate:
3.3.1
LOOP TYPE:
This selects the dialing type the AM8a will out-pulse. This dialing type
may be changed using the "
TOGGLE DIAL
" key (or equivalent character in an
AUTO
DIAL
sequence).
3.3.2
START SIGNAL:
This is the
START SIGNAL
provided by the AM8a when the
START
key
is pressed or the AM8a is in the
AUTO
mode and an
OFF HOOK
is detected.
3.4 PULSE EMULATE
The
PULSE
dialing specifications are programmed in this menu. These parameters are used
when the AM8a
LOOP TYPE
parameter is set to
PULSE
in the
DIALING
menu.
PULSE :
EMULATE: SPEEDpps
10
5 to 25
BREAK%
60
40 to 85
INTRDIGITms
600
120 to 999
Alternate:
3.4.1
SPEEDpps:
This controls the number of pulses per second for each digit out-pulsed.
3.4.2
BREAK%:
This controls the % of break (open loop) of each pulse making up a out-
pulsed digit.
3.4.3
INTRDIGITms:
The Inter-Digit Time is programmed here. This is the amount of time
from the last pulse of the previous digit until the first pulse of the next digit.