AMERITECH AM8a, Instruction Manual

Page: 44 / 152

AM8a Instruction Manual (18-0037) Configuration Parameters
0037-S02.L_22 February 10, 2000
2-9
2.5.4
SLC® Activity Message:
When the message detect active for the a or b events (shown
in ¶2.5.3) is set, the activity messages in the 4Kbps data link can be monitored when
CHAN
nel is set to -97 (refer to 2.3.4). The chart that follows decodes the messages to
identify the Line Group and the Active Channel(s) in the line group.
1
2
3
4
5
6 13
15
17
19
21
23 37
39
41
43
45
47 2
4
6
8
10
12 26
28
30
32
34
36 14
16
18
20
22
24
38
40
42
44
46
48
3
5
7
9
11
1
Line Group
27
29
31
33
35
25
a 01:50.588 RT Activity LG=n X X X X X X X X
b 01:50.588 RT Act Update LG=n X X X X X X X X
=1: Active Channel
=0: Inactive Channel
2.5.5
T/t Mask (single-tone event selection):
This selection, on the second
CONFIG
menu
controls the display of single-tone events. When
YES
has been selected, all single-tone
events will be masked (not displayed). When
NO
has been selected, single tone events
are not masked (displayed).
2.6 RS232 CONFIG
This menu is used to configure the AM8a
RS232
port. The settings can only be changed by
operator entry.
RS232 :
CONFIG: BAUD RATE
9600
300
1200
2400
PARITY
none
odd
even
CR DELAYsec
0
0 to 99 (1sec steps)
Alternate:
2.6.1
BAUD RATE:
This selects the baud rate of the
RS 232
port. Available baud rates are
shown by the alternates listed above.