15
HERCULES II HYBRID INSTALLATION GUIDE
(800) 580-0831
www.AmeriGlide.com
AmeriGlide
10. PREP THE DRIVE SHAFT
1. Install the Drive Motor and fasten it with 4 Hex Bolts
(3/8”-16 x 3/4’’)
.
THE
SOLENOIDS ON THE DRIVE MOTOR SHOULD ALWAYS BE FACING FRONT AND EASILY
ACCESSIBLE.
2. Install the Cable Detection Assembly. Ensure the space between the Bottom of the
Pad and the Cable is the width of two cables.
11. INSTALL THE DRIVE MOTOR
PROCEDURE
Install the Coupler, Coupler Ring and Key onto the Drive Shaft.
INSTALL
1. Insert the Key into the Key Seat and slide the Coupler onto the Drive Shaft, keeping
the Coupler Keyway aligned with the Key.
2. Slide and insert the Coupler Ring into the Coupler.
Solenoids
Drive Motor
Hex Bolt
(3/8”-16 x 3/4’’)
.
Cable Detection Pad
Cable Detection Assembly
Coupler
0.5” (12.7 MM)
Coupler
Assembly
Coupler Ring
Key Seat
Key
THE COUPLER ASSEMBLY SHOULD BE 0.5 INCH (12.7 MM) FROM THE DRIVE SHAFT BASE.
CAUTION
