![background image](http://html1.mh-extra.com/html/american-range/aroffg-230/aroffg-230_installation-manual_2925044004.webp)
4
4580 N. Walnut Rd., N. Las Vegas, NV 89081 | 13592 Desmond St., Pacoima, CA 91331 | tel: 818.897.0808 | 888.753.9898 | www.AmericanRangeHome.com
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING
DAMAGE, PERSONAL INJURY OR DEATH
INSTALLATION AND SERVICE MUST BE PERFORMED BY A CERTIFIED / LICENSED INSTALLER, SERVICE AGENCY OR THE
GAS SUPPLIER
»
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
»
Please observe all local and national codes and ordinances.
»
Do not remove any permanent warning labels or plates from this product.
»
Please ensure that this product is electrically grounded.
»
Consumers must retain these instructions for local inspectors and for future use.
WHAT TO DO IF YOU SMELL GAS
»
Do not try to light any appliance
»
Do not touch any electrical switch
»
Do not use any phone in your building
IMPORTANT SAFETY INSTRUCTIONS
PRECAUTIONS
SHIPPING DAMAGE CLAIM PROCEDURE
The equipment is crafted and inspected carefully by skilled personnel before leaving the factory. The transportation company assumes
full responsibility for the safe delivery upon acceptance of the equipment.
If you receive a damaged product, immediately contact your delivery company, your dealer, your builder or installer. Do not install or
attempt to operate a damaged appliance.
1. Note on the freight bill or express delivery any visible loss or damage and have the note signed by the person making the delivery.
2. File claim for damages immediately regardless of the extent of damages.
3. For damage noticed after unpacking
(concealed loss or damage)
, notify the transportation company immediately and file a
“Concealed Damage” claim with them. This must be done within fifteen
(15)
days from the date that delivery is made to you.
Retain the shipping container for inspection.
Check your local building codes for proper installation methods. In the absence of local codes, this appliance must be installed in
accordance with the National Fuel Gas Code No. Z223.1 current issue, and the National Electrical Code ANSI/NFPA No. 70 current
issue, or the CAN – B149 Installation Codes for Gas Burning Appliances, and C22.1 Canadian Electrical Code Part 1.
Verify the type of gas supplied to the location, being sure that the appliance is connected to the type of gas for which it is certified.
Models come from the factory certified for use with Natural Gas
(NG)
or Liquid Propane
(LP)
gas. Your product, shown on the rating
label and the supplied gas type must be the same. Upon opening your product, the rating label can be located on the front panel. If it is
a cooktop, the rating label can be found on the side panel underneath the left burner.
If connecting this appliance to propane gas, make certain the propane gas tank is equipped with its own high-pressure regulator – in
addition to the pressure regulator supplied with this product when applicable. The maximum propane gas pressure to this appliance
must not exceed 14.0 inches of water column
(34.9 millibar)
from the propane gas tank to the pressure regulator.
Your appliance must be installed by a qualified gas installation technician. Have the technician show you the exact location of the gas
shut-off valve on the incoming gas line so you know how to turn off the gas if necessary.
»
Using a neighbor’s phone, immediately call your gas company
»
Follow the gas supplier instructions
»
If you can not reach your gas supplier, call the Fire Department
!
CAUTION
!
WARNING