American Megatrends MegaPlex II System Manual Download Page 63

Page: 63 / 140

Chapter 2 AMIBIOS Setup

Section 3 Power Management Setup

Choose Power Management Setup from the AMIBIOS Setup main menu. All
Power Management Setup options are described in this section.

ACPI Aware O/S

Set this option to

Yes

if the operating system you are running under complies

with the Intel ACPI (Advanced Configuration and Power Interface)
specification. The settings are

Yes

No.

The Optimal and Fail-Safe default

settings are

No.

Power Management/APM

Set this option to

Enabled

to enable the chipset power management

and APM (Advanced Power Management) features. The settings are

Enabled

Disabled.

The Optimal and Fail-Safe default settings are

Disabled.

Power Button Function

This option specifies how the power button mounted externally on the

computer chassis is used. The settings are:

Setting

Description

On/Off

Pushing the power button turns the computer on or off.

Suspend

Pushing the Power button places the computer in Suspend mode
or Full On power mode.

The Optimal and Fail-Safe default settings are

On/Off.

Green PC Monitor Power State

This option specifies the power state that the green PC-

compliant video monitor enters when AMIBIOS places it in a power saving
state after the specified period of display inactivity has expired. The settings
are

Stand By, Suspend,

Off.

The Optimal default setting is

Suspend

. The

Fail-Safe default setting is

Stand By.

Cont’d

Summary of Contents for MegaPlex II













































































































































Search results

Summary of Contents for MegaPlex II

Reviews:

Related manuals for MegaPlex II

Brands by name

Popular brands

American Megatrends MegaPlex II, System Manual

Search results

Summary of Contents for MegaPlex II

Reviews:

Related manuals for MegaPlex II

Brands by name

Popular brands