American Megatrends MegaPlex II, System Manual

Page: 58 / 140

Megaplex Quad Pentium II Xeon PCI ISA System Guide 50
Section 2 Advanced CMOS Setup
Choose Advanced CMOS Setup from the AMIBIOS Setup main menu.
Advanced CMOS Setup options are displayed by highlighting the option using
the arrow keys. All Advanced CMOS Setup options are described in this
section.
Primary Display This option configures the type of monitor attached to the computer. The
settings are Absent, VGA/EGA, CGA40x25, CGA80x25, or Mono . The Optimal
and Fail-Safe default settings are VGA/EGA.
PS/2Mouse Support Set this option to Enabled to enable AMIBIOS support for a PS/2-type
mouse. The settings are Enabled or Disabled. If IRQ12 is required to be free
for PCI cards, then you must disable this option. If you disable this option, you
cannot use a PS/2-type mouse. The Optimal and Fail-Safe default settings are
Enabled.
Display BIOS P.O.S.T. Messages Set this option to display BIOS messages during the Power
On Self Test. The settings are Yes or No . The Optimal and Fail-Safe default
settings are Yes .
Display Add-On ROM Messages Set this option to display messages when you add an optional
ROM. The settings are Yes or No . The Optimal and Fail-Safe default settings
are Yes .
Pause-On Configuration Screen Set this option to pause at the configuration screen during
setup. The settings are Disabled, 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, 6 sec, 7 sec,
8 sec, 9 sec, or 10 sec. The Optimal and Fail-Safe default settings are 10 sec.
BootUp Num Lock Set this option to On to turn the Num Lock key On at system boot. The
settings are On or Off. The Optimal and Fail-Safe default settings are On.
Cont’d