American Megatrends MegaPlex II, System Manual

Page: 29 / 140

Chapter 1 Hardware Installation 21
Step 4 Install Memory,
Continued
DRAM Configurations On the CPU board, the following configurations can be used:
Bank0 Bank1 Bank2 Bank3 Total
2M x 72 None None None 64 MB
2 M x 72 2 M x 72 None None 128 MB
2 M x 72 2 M x 72 2 M x 72 None 192 MB
2 M x 72 2 M x 72 2 M x 72 2 M x 72 256 MB
4 M x 72 None None None 128 MB
4 M x 72 4 M x 72 None None 256 MB
4 M x 72 4 M x 72 4 M x 72 None 384 MB
4 M x 72 4 M x 72 4 M x 72 4 M x 72 512 MB
8 M x 72 None None None 256 MB
8 M x 72 8 M x 72 None None 512 MB
8 M x 72 8 M x 72 8 M x 72 None 768 MB
8 M x 72 8 M x 72 8 M x 72 8 M x 72 1 GB
16 M x 72 None None None 512 MB
16 M x 72 None None None 1 GB
16 M x 72 16 M x 72 16 M x 72 None 1.5 GB
16 M x 72 16 M x 72 16 M x 72 16 M x 72 2 GB
32 M x 72 None None None 1 GB
32 M x 72 32 M x 72 None None 2 GB
32 M x 72 32 M x 72 32 M x 72 None 3 GB
32 M x 72 32 M x 72 32 M x 72 32 M x 72 4 GB
You can populate the memory module in a similar way. There is no restriction to
the sequence in which the banks are populated (in the table above, a sequence
has been followed due to space restrictions), but to take advantage of ABP and
C2C, you must follow the rules previously mentioned.
Cont’d