American Megatrends 64 Series User Manual Download Page 63

Page: 63 / 104

American Megatrends 80486 Baby EISA Motherboard User's Guide

ADVANCED CMOS SETUP Options,

Continued

System ROM Shadow F000,64K

The System BIOS (E000h – FFFFh) can be shadowed. The settings are

Enabled

Disabled.

The BIOS

Setup default is

Enabled.

The Power-On default is

Disabled.

Boot Sector Virus Protection

When enabled, the BIOS issues a warning when any program or virus issues a Disk Format command or
attempts to write to the boot sector of the hard drive. The settings are

Enabled

Disabled.

The BIOS

Setup and Power-On defaults are

Disabled.

If enabled, the following is displayed if there is an attempt to

write to the boot sector. You may have to type N several times to prevent the boot sector write.

Boot Sector Write!!!

Possible VIRUS: Continue (Y/N)? _

The following is displayed if any program attempts to format any

cylinder, head, or sector of any hard disk drive via the BIOS INT 13

Hard Disk Drive Service:

Format!!!

Possible VIRUS: Continue (Y/N)? _

Cacheable ROM Area

This option permits the system BIOS and video BIOS to be not only

shadowed but also makes the memory segments cacheable as well for even

faster access. The settings are Disabled, Video (only the video BIOS

memory segment is cacheable), Main (only the system BIOS RAM memory

segment is cacheable), or Both (both memory segments can be cached).

Shadowing must be enabled before this option can take effect. The BIOS

Setup and Power-On defaults are Disabled. You must be reasonably certain

that the no application will write to the cached system BIOS or video

BIOS memory areas before you choose Video, Main, or Both.

Summary of Contents for 64 Series









































































































Search results

Summary of Contents for 64 Series

Reviews:

Related manuals for 64 Series

Brands by name

Popular brands

American Megatrends 64 Series, User Manual

Search results

Summary of Contents for 64 Series

Reviews:

Related manuals for 64 Series

Brands by name

Popular brands