American Megatrends 64 Series User Manual Download Page 51

Page: 51 / 104

American Megatrends 80486 Baby EISA Motherboard User's Guide

AMIBIOS Setup Main Menu

The AMIBIOS Setup Main Menu options are:

Each option is explained in detail in this section.

Warning Message

A warning is displayed every time you choose STANDARD CMOS SETUP,

ADVANCED CMOS SETUP, or ADVANCED CHIPSET SETUP. Press any key to

continue.

Auto Configuration With BIOS Defaults

Auto Configuration With BIOS Defaults uses the default system values.

The BIOS default value are best-case values that should optimize system

performance. If CMOS RAM is corrupted, the BIOS defaults are

automatically loaded. To use the BIOS defaults, highlight this option,

type Y and press <Enter>. The following appears:

Default values loaded. Press any key to continue.

Summary of Contents for 64 Series









































































































Search results

Summary of Contents for 64 Series

Reviews:

Related manuals for 64 Series

Brands by name

Popular brands

American Megatrends 64 Series, User Manual

Search results

Summary of Contents for 64 Series

Reviews:

Related manuals for 64 Series

Brands by name

Popular brands