American-Lincoln
21
SC7750 IC
HYDRAULIC RESERVOIR LEVEL SIGHT GAUGE
(See Figure 24)
The sight gauge is located on the inside of the hydraulic
reservoir in the engine compartment. The sight gauge is
used to indicate the level of fluid in the reservoir. The fluid
level must be visible in the sight gauge when the hopper is
in the down position.
MAIN BROOM COMPARTMENT DOORS (See Figure 25)
The main broom compartment doors are located behind
the front tires on both sides of the machine. The doors
provide access to the main broom for service or inspection.
WARNING
Operate Only When Lids, Doors, And Access Panels Are
Securely Closed.
Open the right side door to remove or replace the main
broom. The right side door is an integral part of the main
broom drive system and must be closed for operation.
Open the left side broom door for inspection. Check the
drive hub for banding and shrink-wrap which have a
tendency to get tangled in the broom driver.
To open the main broom door, reach inside the hole in the
door and lift up on the latch handle.
The door latch will automatically engage when the door is
closed.
NOTE
Side squeegees mount on doors and the scrub deck must be
lowered to slide the doors and squeegees into place.
NOTE
For proper function of side squeegees, side squeegees must
be positioned so the lift strap is above the scrub deck lift
brackets. Damage to the side squeegees could occur if not
in the correct position.
SEAT COMPARTMENT COVER (See Figure 26)
The seat compartment cover opens to allow easy access to
various components that will need to be inspected or
serviced periodically. The cover opens forward and has a
safety latch to hold the cover in the open position.
On Gas/Diesel/LP powered machines, the seat compart-
ment contains the fuel tank.
C0729A/9707
MAI
N
BR
OO
M
C
O
M
P
ARTME
N
T
LATC
H
P
ULL U
P
T
O OP
E
N
H
YDRAUL
I
C R
E
S
E
RVO
I
R
L
E
V
E
L S
I
G
H
T GAUG
E
C1730
FIGURE 24
C1699a
FIGURE 26
C0729A
FIGURE 25
OPERATION OF CONTROLS AND GAUGES
C1699a/0802
